Australia’s preferred online pharmacy

CutPrice Pharmacy

Menu
Cart 0

Alps Water Filtration Unit 10 Stage Filtration 12 Litres

  • $52333
  • Save $101


Description

ALPS Water Filtration Unit 12L

You have arrived at our preferred method of water filtration – our gravity fed unit with re-mineralisation and optional energising. Sounds pretty complex right? Well we have done the hard yards for you at Alps, researched the best kind of ways to filter water, done the tests to ensure the best quality water and even sourced the most innovative approach to re-energising the water you drink.

Water holds memory, so a gentle approach to filtration and a choice to re-energise ensures you to receive the most pure hydration possible.

10 STAGE FILTRATION:

ALPS is a natural gravity fed water filtration system that is designed to remove all types of contaminants in tap water via a ten stage filtration process

Stage 1: Ceramic Dome (Replace every 6 to 9 months) 

Immerse/soak in water at least ten minutes, which rids the dome of any dust particles from the manufacturing process and primes it for use. Assemble ceramic dome via butterfly nut & washer, onto the smaller (top) container as illustrated re (SPL-2/3). Gently remove and gently clean the dome periodically with a soft toothbrush/fabric under running water, especially if/when residue forms on the dome surface.

Stage 2 to 7: 6 layer Cartridge (Replace every 6 to 9 months) 

Immerse/soak in water for at least two hours – this rids the cartridge of any dust particles from the manufacturing process and primes it for use. After soaking the 6-stage filter cartridge, place it under running water and then give it a good shake. This will remove any air pockets and give you a good flow. (Repeat this process if ever you find your unit’s water flow is slowing down). Screw cartridge onto threaded plate (SPL-4) and place onto lower/bottom water tank cover (SPL-6). Flush/backwash the cartridge every 2-3 months under running water.

Stage 8: Mineral Stones (8th stage – Replace every 12 – 18 months)

Place mineral stones in boiling water for 5 minutes, then place outdoors to dry naturally. Spread them evenly to cover the surface area on the bottom of the lower tank (SPL-8). Repeat this process every 6 months for optimum mineral replacement.

Stage 9: Magnetic Tap

Attach to outlet on lower/bottom water tank making sure that one washer is fixed internally and the other externally. Please do not use excessive force when installing and or using the tap.

Stage 10: PRILL BEADS (OPTIONAL)

Rinse Prill Bags under running water for 2-3 minutes. Place Prill Bags on top of stones on either side of the tank. DO NOT take Prill Beads out of the bags.

Alps is a natural gravity fed water filtration system that is designed to remove all types of contaminants in tap water via a ten stage filtration process.

The Alps water filter represents a natural, simple, easily maintained and cost effective unit, that will provide you with a consistent supply of clean and healthy drinking water, essential for general health, longevity and quality of life.

Assembly is simple along with a straight forward maintenance routine. All parts and components are inexpensive and readily available. Domes and cartridges are typically replaced every 6 – 9 months, depending on your tap water quality and quantity used. Mineral stones are generally replaced every 12 – 18 months.

For optional re-energising, we recommend adding Prill Beads in to your order. The 14L unit does best with 2-3 bags whereas 2 bags is suitable in the 12L unit.

The unit comes complete with all filters and mineral stones as pictured to begin your clean and hydrating water journey.

Dimensions (fully assembled): 58cm (Height)  x 35.5cm (Base including front lip)

Please note: The bottom tank holds 8L and the top tank holds 4L to create the combined total of 12L. Please also keep in mind that this is not a sealed unit; water will likely flow over if the bottom tank is overfilled.


CPP


We Also Recommend